Erasing all messages in the mailbox, Retrieving messages in the mailbox, Erasing recorded messages in the mailbox – Panasonic KX-F2710NZ User Manual
Page 56
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advanced Instructions
Retrieving messages in the mailbox
When there is a new message in a mailbox, the mailbox indicator will flash on the display.
Example: A new incoming message has been recorded in mailbox 2.
-W-
(MAIL BOX)
Q Press MAIL BOX repeatedly until the desired
mailbox number is displayed.
Example: The mailbox number is 2.
BOX2
0 2
Q Enter the mailbox password.
Example: The password is 555 (factory
setting).
PASSWORD=555
—The unit will automatically play back newly
recorded messages.
BOX2 PLAYING 01
0 To exit the mailbox, press MAIL BOX.
Notes:
• If no new messages are recorded, the unit will play back all the messages recorded in the mailbox,
• The ALL MESSAGES, REPEAT, SKIP and STOP buttons can be used.
• If you leave the mailbox password set to “555" (factory setting), you need not enter the password in
step 2. To listen to the recorded messages, press the NEW MESSAGES or ALL MESSAGES button.
Erasing recorded messages in the mailbox
Erasing specific messages in the mailbox:
Press ERASE while the message you want to
erase is playing.
Erasing all messages in the mailbox:
0 Press MAIL BOX repeatedly until the
desired mailbox number is displayed.
Example: Mailbox 1 is selected.
0 Press ERASE.
BOXI ERASE OK?
© Press START/SET for confirmation.
ERASE COMPLETED
0 To exit the mailbox, press MAIL BOX.
56