Panasonic KX-F2710NZ - Manual (Page 52)

Advanced Instructions
Voice Contact
You can have a voice conversation on the same call after fax transmission or reception is completed.
This saves the extra expense and time of making a subsequent telephone call to discuss the information
sent over the fax.
im p o rta n t:
• This feature works only when the other party’s unit is equipped with the voice contact/cail reservation
feature.
Initiating voice contact
Press SP-PHONEA^OICE STDBY while
transmitting or receiving documents.
VOICE STANDBY
—Your unit will call the other party with a
distinctive ring.
Q When the other party answers, the unit will
emit a distinctive ring. While ringing, press
SP-PHONEWOlCE STDBY again or lift the
handset to start speaking.
N o te s :
• If you initiate voice contact while transmitting
documents, you can speak after all the
documents have been transmitted.
• If you initiate voice contact while receiving
documents, you can speak after the current page
of the documents is received.
• You can initiate the voice contact by lifting the
handset during transmission or reception.
• If the other party does not answer, the line will be
disconnected automatically.
Receiving a request for voice contact
If the other party initiates voice contact, your unit will emit a distinctive ring after the transmission or
reception is completed.
When a distinctive ring is heard, press SP-PHONE/VOICE STDBY or lift the handset, then start speaking.
N o te :
• If you do not answer within 10 seconds of hearing the distinctive ring, one of the following occurs:
— When the unit is in the ANS/FAX mode, it will play back your greeting message and record the incoming
voice message.
— When the unit is in the TEL/FAX, FAX or TEL mode, the line will be disconnected.
52