Remote fax receiving using an extension phone, Menu, Remote fax receiving using an extension – Panasonic KX-F2710NZ User Manual
Page 43: Phone, Cd cd cd o, Using an extension phone, Changing the remote fax activation code
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advanced Instructions
Remote Fax Receiving Using an Extension Phone
If you have an extension phone connected to the same line, it is possible to receive a fax message into your
facsimile unit by using a touch tone extension phone.
This saves you the trouble of going to the facsimile unit and pressing the START button.
important:
• This feature is available when you receive a call.
• To activate this feature, use a touch tone telephone as an extension phone and dial the remote fax
activation code. The remote fax activation code is set to " * * ” as a preselected setting.
Using an extension phone
Q When a cal! comes in, lift the handset of the
extension phone.
© If a slow beep is heard, or the other party
wishes to send you a fax, press the remote fax
activation code.
o Replace the handset on the cradle.
—The facsimile unit will activate the fax
function to receive documents.
Note:
• The number of the remote fax activation code
can be changed to another one. See below.
E
Changing the remote fax activation code
Your code can be from 1 to 4 digits long. The numbers 0 through 9 and character * may be used,
(e.g.
123,123*)
(
)|MENU
CD CD CD
o
START/iSEf)
o
Press MENU.
1. SYSTEM SET UP
Press #41.
REMOTE FAX ACT
Press START/SET.
CODE=>(< ^
©
0(2)®
Oct)©
©d)®
o®®
9—
B
start
/[
set
]
o
( )|MENU
Enter the new code
number.
Press START/SET to
store the number.
Press MENU to end the
program.
Note:
• if the remote fax activation code is set to 'V000’\ the unit does not work properly.
43