Panasonic Panafax UF-766 - Manual (Page 78)

ADVANCED FEATURES
Parameter
Number
Parameter
Setting
Number
Setting Comments
41 Comm. Journal
1 Off
Selecting whether the machine prints out a
Comm, journal (memory transmission) or
XMT journal (direct transmission).
• Always: prints out after every transmission
ends.
• Inc. Only; prints out only when an error
occurs
2 Always
3* Inc. Only
43 Conf. RCV Report
1 Off Selecting whether the machine prints out a
confidential RCV report automatically.
2* Automatic
45
Upper Cassette
Ree. Paper Size
1 Letter
Selecting which recording paper size is used
in upper and lower cassettes.
2 Legal
3* A4
46
Lower Cassette
Ree. Paper Size
1 Letter
2 Legal
3* A4
47 Department Codes
1* Invalid Selecting whether the department code
function can be performed.
2 Valid
0 Note:
3. V/hen you set this parameter to ON, parameter 03 on page 70 must also be set to ON.
2. Reduction RCV
This Junction is available when REDUCTION RCV or REDUCTION COPY is set to '‘invalid". It is to control printing on the second
page depending on the setting value in this parameter when the document is divided into two pages.
Example: The parameter is set to 20 mm.
Sending Receiving
less than 20 mm
First page Second page is not printed
The machine compares the length that was set in parameter 34 with the remaining length to be printed on the second page and discards
the data to be printed if the length is shorter than the setting value.
71