Panasonic Panafax UF-766 - Manual (Page 77)

ADVANCED FEATURES
Parameter
Number
Parameter
Setting
Number
Setting Comments
r Invalid
Selecting whettier the machine performs
and checks the XMT-password of the n Password XMT 2 OFF
3 ON
receiving station when transmitting.
1* invalid
Selecting whether the machine performs and
checks the RCV-password of the 12 Password RCV 2 OFF
3 ON
transmitting station when receiving.
18 Stamp MEM. XMT
1* OFF
Selecting whedier the machine stamps the
original document when storing into
memory. Selecting whether the machine
stamps the original document when storing
into memory (See Note 1).
2 ON
20 Fax Access Code
1* Invalid Selecting whether the machine uses a 4-digit
password to prevent unauthorized use of the
machine. 2 VaUd
21 Header Print Format
1* From to Selecting the header text for fax transmission.
The header can either indicate FROM-TO, or
the sending station's LCXJO and ID. 2 LOGO ID No.
22 RCVT> Time Print
1* Invalid Selecting whether the machine prints
received time, page # and remote ID on each
received page. 2 Valid
32 Initial Operator Call
1 OFF Selecting whether the machine sounds
operator call when no fax signal is received
in the fax mode. 2* ON
33 Reduction RCV
1 Invalid Selecting whether ttie machine reduces the
printed copy automatically to fit the size of
the recording paper used when receiving. 2* Valid
1* No Discard
34
Oversized Page
(See Note 2)
2 10mm Setting the amount of remaining data to be
discarded when an oversized document is
received.
3 20mm
4 30mm
35 RCV to Memory
1* Invalid
Selecting whether the machine receives
2 Valid document(s) into memory.
39 Reduction Copy
1 Invalid Selecting whether the machine reduces the
2* Valid
printed copy automatically to fit the size of
the recording paper when copying.
7n