Panasonic Panafax UF-766 - Manual (Page 137)

SUPPLEMENTARY INFORMATION
Paper Specifications
Basic Weight:
Thickness:
Moisture Content:
Smoothness:
Acid Content:
Fusing Compatibility:
Cutting Dimensions:
Grain:
Cut Edge Conditions:
Ash Content:
Curl:
Packing:
Size:
Photo Copying Paper 60 to 90 g/m^ (16 to 24 pounds)
3.7 to 5.5 mils (1 mil = 1/1000")
4% to 6%
100 to 300 Sheffield
5.5 pH minimum
Must not scorch, melt, offset material, or release hazardous
emissions when heated to 200 ®C {392 ®F) for 0.1 second
±0.0313 inch of nominal, comers 90® ± 4°
Long grain
Cut with sharp blades, no paper dust
Not to exceed 10%
No allowable curl toward side to be imaged (printed)
Polylaminated moisture-proof ream wrap
A4: 210 mm X 297 mm
Letter: 216 mm x 279 mm
Legal: 216 mm x 356 mm
Never use the following paper:
• Extremely smooth or shiny paper or paper that is highly textured
• Coated papers
• Letterhead using low temperature or thermography.
These materials may transfer onto the fusing roller and cause damage. Any pre-printed paper should use this
compatible with 200 ®C for 0.1 second.
• Damage or wrinkle paper, or paper with irregularities such as tabs, staples, etc.
• Multipart forms or carbonless paper.
• Paper with a cotton and/or fiber content over 20 %,
l'in