Panasonic Panafax UF-766 - Manual (Page 52)

r
ADVANCED FEATURES
T his machine provides a choice of two polling
procedures: normal polling and tum-around
polling. The station that dials is called the polling
station, and the station to be polled is called the
polled station.
Foiling might not function with all fax machines.
We suggest you attempt a trial polling before you
actually poll for important documents.
Polling
How to Prepare to Be Polled
Setting the Polling Password
You will need to set a polling password shared by the
other station before you perform a polling operation. If
you do not set a polling password when you are setting
the user parameters, you can set a temporary polling
password during the polling operation. The temporary
password is erased after polling.
Setting the Fax Parameter
The station to be polled must know in advance that a
polling station win be calling, and therefore must have
a document in memory.
As a standard setting the polled file in the memory will
be erased after the document was polled.
You can set the polled file to be retained in the memory
after the document was polled (see fax parameter 4 on
page 69).
Setting the Polling Password
FUNCTION
[ n 1 then
USER PARAMETERS
POLLING PASSWORD
START
repeatedly until the polling password appears on the
display.
Enter the four-digit password.
Example: IX! E S U1
POLLING PASSWORD
9876
If you make a mistake in Step 3, use the [<1 or [>] to
move the cursor to the incorrect number, and then enter
the new number over it. To erase the password, press
ICLEARI.
4 To return to standby , then|-fi^
TT ^5
lt/| Note: //the passvMjrd is not set at the other station, you can
poll the other station even though your machine has a
password.
45