Panasonic Panafax UF-766 - Manual (Page 104)

SPECIALIZED FEATURES
Setting Up Your Machine for Confidential Communication
To use the confidential conununication feature, you must first set the confidential communication fax parameters
described below. The following four settings need to be set when the centre machine is a UF-620, UF-640, or UF-650.
Then, every time you actually send a confidential document, you must set a confidential code.
0
Confidential Fax Parameter
This switches the confidential parameter to ON or OFF
(see Note 2).
Own Telephone Number
Your full telephone mamber should be entered {see Note
2 ).
Network Password and Polling Password
You may \ise a network password and polling
password (see Note 1) to prevent outside fax machine(s)
from using the confidential communication network.
The same password must be provided to all the
machines inside the network (see Note 2).
Confidential Code
A four-digit code, which you must assign to each
confidential fax you send. It identifies the fax when it is
stored in the centre station. The receiving party must
know the code in order to poll the fax from the centre
station.
Note;
1. To set polling password, see page 45.
2. When using a confidential mailbox, you need not set the
first three items listed above.
To set the confidential parameter;
FUNCTION
a
START
then
FAX PARAMETER
NO.-fl
3 Enter the fax parameter number 9.
^START
4 Enter setting number 2.
09 CONF.PARAMETER
l-.OFF
09 CONF.PARAMETER
2: ON
5 To return to standby,
©STOP
07