Panasonic Panafax UF-766 User Manual
Page 125
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PROBLEM SOLVING
Refilling or Replacing the Verification Stamp
The verification stamp contains ink. When the stamp appears faded or hard to read, the stamp should be refilled or replaced.
1
Open the trai\smitting cover. Remove the verification stamp from the stamp holder.
Verificarion Stamp
Transmitting Cover
Stamp Holder
2a
Refill the stamp by placing a few drops of specified ink into it. Give the ink a few hours to spread. Make sure that the ink
does not spill from the stamp when it is turned over. Then reset the stamp into the holder.
C\
2b
Replace the stamp by installing a new stamp in the stamp holder.
3
After the stamp has been refilled or replaced, close the transmitting cover.
Note: Please contact your local Panasonic dealer to purchase a new stamp, its order No. is given on page 131.
118