Panasonic Panafax UF-766 - Manual (Page 37)

BASIC FEATURES
Full Number Dialling
1
2
Place the document face down on the ADF and adjust
the document guides.
Enter a number using the keypad.
Example: a [H [5] 0] a a B
When transmitting to multiple stations, enter each
telephone number and press |
Do not press [STARTI in Step 3 (see Note).
<1> START
The document is stored
into memory with a file
number, then the
machine begins to dial.
♦STORE* N0
PAGES-0Q3
. 0 0 1 \
I
16-APR-1992 15:00
10%
When the other station answers:
A beep sound is heard through the speaker and the ON LINE
lamp lights. The document is sent (when the other station is
set to automatic reception).
When transmission ends, the ON LINE lamp goes off. The
machine prints out a memory transmission journal (see page
75) when COMM. JOURNAL in fax parameter is set to "2".
The document in memory will be erased automatically.
If the line is busy: refer to redialling on page 33.
0 Note: You can enter up to 3full telephone numbers.
How to Cancel a Memory Transmission
If you wish to cancel the reserved memory transmission
documents, this can be done while the machine is dialling the
remote station or while it is transmitting the document.
1 Press [DISPLAY! to confirm whether the ID number or
dialling number on the display is the one you want to
cancel.
You can check ID, transmitted page and statin name or
telephone number using [MODEI [+] or 0 l^y-
2 Presr 'STOPI when the selected number or dialling
number it shown on the display.
COMMUNICATIN STOP ?
1:Y£S 2:N0
3 Enter [T] to cancel the transmission.
While Dialling
♦DIALLING*
'
STOPPED
While Transmitting
ON LINE *MEM.XMT*
STOPPED
The current trar\smission will be cancelled and erased
from memory. A communication journal is printed out
showing the results of the cancelled transmission. If
multiple files have been stored, they will remain in
memory and be transmitted.
0 Note:
lamp is it.
button is varied when the ON LINE