Panasonic Panafax UF-766 - Manual (Page 112)

PROBLEM SOLVING
W hen something unusual occurs, press
lEMSPLAYl . The display may show one of
the information codes below. These will help you
solve the problem.
Information Codes
Information Code Meaning Action
001/005 Lower or upper cassette recording
paper jam near the feed area. Remove jammed paper.
{See page 108)
002 Recording paper jam near transfer or
fuser area.
Remove jammed paper.
(See page 109)
003 Recording paper jam near exit area Remove jammed paper.
(See page 110)
010 Both recording paper cassettes are
empty or set improperly. Reload recording paper.
(See page 14)
013 Recording paper size is smaller than
setting. Check fax parameters 45 and 46.
(See page 68)
021/022 Printing system is abnormal. Turn the power switch OFF and then ON. If the
system still doesn't work well, call your service
personnel.
030 Document misfeeding. 1. Reload the document properly. (See page 26)
2. Remove document jam.
(See page 111)
031 Document paper is too long or
jammed.
Etocument length exceeds 1 meter.
1. Reload the document property. (See page 26)
2. Remove document jam.
(Seepage 111)
041 No toner. Replace toner cartridge.
(See pages 112 and 114)
042 No drum unit. Install the drum unit. (See pages 112-113)
046 Replace drum unit. Set new drum unit (See pages 112-113)
055 Printing system is abnormal. Turn the power switch OFF and then ON. If the
system still doesn't work well, call your service
personnel.
060 Door or cover is open. Close the transmitting or receiving cover.
400/464 During initial handshake, receiving
station did not respond or
communication error occurred. 1. Check with the other party.
2. Reload the document and try again.
402/404/405/432 During initial handshake,
communication failure occurred. Reload the document and try again.
403 No polling capability at the remote
side.
Ask remote side to set polled function "ON".
407/463/469 No confirmation from the receiving
j station for the previous page sent.
Wait a few minutes and transmit again.
10=;