The rear panel, Bypass jack, Memory inc/dec trigger jack – Yamaha FX550 User Manual

Page 7: Midi in connector, Dc 12v in connector, Cable clip, Phones jack, Phones level control, R&l(mono) jacks, Tuner out jack

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Chapter 1: Controls & Connections

The Rear Panel

© BYPASS jack

An optional Yamaha FC-5 foot switch can be connected
here and used to bypass the FX550. See “Foot switch
Control” on page 28.

© MEMORY INC/DEC TRIGGER jack

An optional Yamaha FC-5 foot switch can be connected
here and used to select effect programs or to set the
tempo parameter for the tempo delay and tempo modu
lation delay effects. See Chapter 5 “Foot switch Con
trol” on page 28.

® MIDI IN connector

An optional Yamaha MFC06 or MFC05 MIDI foot con
troller can be connected here. See “MIDI Control” on
page 32.

DC 12V IN connector

Connect the supplied power supply adaptor to this con
nection.

Cable clip

Thread the power supply adaptor cable through this clip
to prevent accidental disconnection.

A pair of stereo headphones can be connected here.

® PHONES LEVEL control

This control adjusts the volume level of the headphones.

® R&L(MONO) jacks

Connect the R and L(MONO) jacks to a stereo amplifier
or a pair of guitar amplifiers. If you are using a mono
amplifier, connect only the L(MONO) output.
These outputs can also be connected directly to a multi
track recorder or mixer for recording.

® TUNER OUT jack

Your guitar tuner can be connected to this connection.