Set up procedure, Operation procedure, Off ^ slow ^ fast ^ slow ^ off slow fast – Yamaha FX550 User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 5: Remote Control
- Speed Switching
• Set Up Procedure
1. Press the
[
▼ ] or [
A
] button to select the effect program to be controlled.
2. Press the [UTILITY] button to show the F.SW FUNCTION display.
3. Press the [ ▼ ] or [
A
] button to select “EFFECT TRIGGER”.
4. Press the [EDIT] button to show the TRIGGER ASSIGN display.
5. Press the [
T
] or [
A
] button to select “MOD”.
6. Store the setting.
Ducking -
• Operation Procedure
1. Connect the foot switch to the MEMORY INC/DEC TRIGGER jack on the rear panel.
2. Press the foot switch to change the SPD parameter as and when required. The parameter for
will be switched as follows.
OFF ^ SLOW ^ FAST ^ SLOW ^ OFF SLOW FAST ^.......................................
• Set Up Procedure
1. Press the [
T
] or [
A
] button to select the program to be controlled.
2. Press the [UTILITY] button to show the F.SW FUNCTION display.
3. Press the [ ▼ ] or [
A
] button to select “EFFECT TRIGGER”.
4. Press the [EDIT] button to show the TRIGGER ASSIGN display.
5. Press the [ ▼ ] or [
A
] button to select the effect section to be controlled.
6. Store the setting and switch to Play mode, then the effect will be bypassed.
• Operation Procedure
1. Connect the foot switch to the MEMORY INC/DEC TRIGGER jack on the rear panel.
2. Press the foot switch to apply the selected effect. When the pedal is not pressed, the effect
will be ducked (bypassed). Delay echoes will continue even after the pedal has been released.
30