Yamaha GEP50 - Manual (Page 26)

■ Bank Selection and MIDI Channel Programming
© Press the UTILITY button until the MIDI CONTROL function
appears (MIDI CONTROL is the second function on the
UTILITY list”).
® Select the bank to program using the and [^buttons.
® Press the STORE button to move the cursor to the channel
(ch) parameter.
® Use the and buttons to set the receive MIDI channel
(1 — 16), the OMNI mode (all channels can be received),
or turn MIDI reception OFF for the selected bank.
® Press the MEMORY button to return to the BANK parame­
ter if you wish to select a different bank for programming.
M I D I C O N T R O L
B A N K : A c h = 1
M I D I C O N T R O L
B A N K : B c h = 1
Selected bank
M I D I C O N T R O L
B A N K : B c h = 1
M I D I C O N T R O L
B A N K : B c h = 1 £
I Assigning Effects to MIDI Program Change Num­
bers
© Press the UTILITY button until the MIDI PROG CHANGE
function appears (MIDI PROG CHANGE is the third func­
tion on the UTILITY “list”).
® Use the and buttons to select the program change
number to which a new GEP50 memory location number
is to be assigned. The range of available program change
numbers is from 1 to 128.
® Press the STORE button to move the cursor to the MEM
(memory number) parameter.
® Use the and buttons to select the memory location
number containing the effect which is to be assigned to
the currently selected program change number.
® Press the MEMORY button to return the cursor to the PGM
(program number) parameter in order to select a new pro­
gram change number for effect assignment.
MIDI channel number MEM number
27 GEP50 GUITAR EFFECT PROCESSOR