Phase dist, Symphonic dist, Distortion levei (distortion): 0 — 100 – Yamaha GEP50 User Manual

Page 16: Phase balance (phase bal): 0 — 100, Symphonic baiance (sympho bal): 0 — 100, Modulation frequency (mod. fro): 0.1 hz — 20 hz, Modulation depth (mod. depth): 0% — 100, Trigger levei (trg. level): 1 — 100, Release time (release): 5 — 32000 miiiiseconds, Moduiation frequency (mod. fro): 0.1 hz — 20 hz

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

23. Phase Dist.

24. Symphonic Dist.

Phasing plus distortion.

Symphonic plus distortion.

Distortion Levei (DiSTORTiON): 0 — 100%

Sets the “degree” or “depth” of the distortion portion of the

effect.

Distortion Levei (DiSTORTiON): 0 — 100%

Sets the “degree” or “depth" of the distortion portion of the

effect.

Phase Balance (PHASE BAL): 0 — 100%

Determines the amount of phase effect appiied to the distor

tion sound.

Symphonic Baiance (SYMPHO BAL): 0

—

100%

Determines the amount of symphonic effect appiied to the

distortion sound.

Modulation Frequency (MOD. FRO): 0.1 Hz

—

20 Hz

Sets the speed of the effect variation.

Modulation Depth (MOD. DEPTH): 0% — 100%

Sets the depth of the effect.

Modulation Deiay (MOD. DLY): 0.1 — 8.0 miiiiseconds

This sets the basic deiay time from the initiai direct sound to

the beginning of the phase effect.

Trigger Levei (TRG. LEVEL): 1 — 100

Determines the ampiitude of the input signai required to

trigger the effect. This parameter, in conjunction with the

RELEASE parameter beiow, functions effectively as a noise

gate to cut out hiss and noise when an input signal is not

present. TRG LEVEL should be set so that the effect is

activated only when a note is played on the instrument

used.

Release Time (RELEASE): 5 — 32000 miiiiseconds

Determines the amount of time it takes for the distortion

gate to close after the input signal drops below the trigger

level. Proper setting of the RELEASE parameter is essential

to allow a natural decay of the source instrument sound.

Moduiation Frequency (MOD. FRO): 0.1 Hz — 20 Hz