Panasonic KX-FPG175 - Manual (Page 75)

Features Summary
Code Feature & Display Settings How the unit operates
#70
Calling your pager
ON
See page 50 for details
PAGER CALL
MDDE=OFF [±]
If you have a pager and wish to
know when your unit receives a fax
□r an incoming message, activate
Ihis feature
OFF
#76
Setting the connecting tone
ON
You can confirm the status of the
other party's machine
■ If the ring back tone continues, the
other party's machine may not be
a facsimile or may have run out of
paper Check with the other party
■ The connecting tone volume
cannot be adjusted
CONNECTING TONE
MODE=GN . [±]
If you often have trouble when
sending a fax, this feature allows
you to hear connecting tones fax
tone, ring back tone and busy tone
OFF
#77
Changing the receiving mode in
the AUTO ANSWER setting
TAD/FAX
'TAD/FAX” Telephone Answering
Device/Facsimile mode (p 54)
"FAX ONLY" Facsimile only mode
(P 47)
‘TEL/FAX” Telephone/Facsimile
mode (p 4B, 49)
AUTO ANSWER
MODE=TAD/FAX [±]
FAX ONLY
TEL7FAX
Changing the TEL/FAX delayed See pages 4B and 49 for details
ring setting
TEL/FAX RING
#7B
RINGS=2 [±]
1, 2, 3, 4
If you use an extension telephone
in TEUFAX mode, select the
desired number of rings of the 1
extension telephone
Resetting on advanced features 1 Follow steps 1 and 2 on page 74
to their default settings YES 2 Press or 1° select
#B0
SET DEFAULT
“YES"
RESET=NG [ ±] 3. Press fs^
NO
4. Press [SET] again
5 Press [MENUl
(The default setting is in bold type )
75