Ink film - installing / replacing, For replacement only – Panasonic KX-FPG175 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Setup (Base Unit)

Ink film - installing / replacing

Install the included ink film or replace the used ink film with a new one

The fellewing ink films are available for replacement

Model No

KX-FA53 Replacement film (1 roll)

Model No.

KX-FA55: Replacement film (2 rolls)

Each roll prints about 150 letter-sized pages See page B for accessory information

Open the front cover by pulling up the center

part

Center part

Front cover

Push the back cover open button (green) on

the right side of the unit

Push the back cover open lever (green)

inside of the unit

Back cover

open lever (green)

Back

cover

open

button

(green)

Open the back cover

■ For first lime installation of the supplied ink

film, skip to step 6

Back cover

For replacement only

Pull out the blue gear and remove the used

ink film Remove the used core

(continued)

For fax advantage assistance, call 1-BD0-435-7329

Used

ink film