Fax only mode, All calls are received as faxes), Activating fax only mode – Panasonic KX-FPG175 User Manual
Page 47: Note, Receiving faxes
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Receiving Faxes
FAX ONLY mode —
—
(all calls are received as faxes)
Activating FAX ONLY mode
1
Set fealure #77 to “FAX ONLY" (p 75)
If the arrow (▼) is not shown on the right of
the display, turn it on by pressing
[AUTO ANSWER]
■ The display will show the number of rings
before the unit answers a call in FAX
ONLY mode
Display
PICKUP
&
RCV
FAX
AFTER 3 RINGS[±]
If you wish to change the ring setting, press
C+D CED
until the desired number is
displayed, and press
[SET]
ON
When receiving calls, the unit will
automatically answer all calls and only
receive fax documents
Note
■ If the arrow (▼) IS already shown on the right of the
display and you wish to change the ring setting, turn
Ihe arrow off once then on again by pressing
[AUTO ANSWER) and follow the instructions in
step 3
■ This mode should not be used with a telephone line
which
IS
used for both phone calls and faxes Fax
communication will be attempted even if someone is
trying to call you We recommend the following setup
47