Panasonic KX-FPG175 - Manual (Page 50)

Receiving Faxes
Extension telephone
If you USB the fax machine with an extension telephone, you can receive fax documents using
the extension telephone You do not have to press [ FAX/START ] on the fax machine
Important:
■ Use a touch tone telephone as the extension telephone and enter the fax activation code firmly
When the extension telephone rings, lift the
handset of the extension telephone
When
— document reception is required,
— a fax calling tone (slow beep) is heard, or
— no sound IS heard,
press @ (pre-selected fax activation
code) firmly
1
2
Hang up the handset
■ The fax machine will start reception
Note-
■ You can change Ihe fax activation code in
fealure #41 (p 72)
Pager call - when the unit receives a fax or
voice message--------------- ---------------------------
This feature allows your unit to call your pager when your unit receives a fax document or an
incoming voice message
^ Press (MENU)
Display
Press fSETl
SYSTEM SET UP
PRESS NAVI [ M > ] MSG =07734
Press then [т1 [ol
PAGER CALL
MODE=OFF [ ± ]
Press or CED to select "ON"
PAGER CALL
MODE=GN [±]
4
5
6
7
■ If this feature is not required, select “OFF'
Press (J et )
Enter your pager number up to 30 digits
Example
■ The default code 07734 will
show “Hello'" on your pager
■ If you want to change this
message, enter your message
up to 30 digits
Press [ set ]
■ The unit will dial the stored
number
PAGER TEST
NO =12025551234
10
11 Check that your pager received
the pager test call
Press [DIGITAL 5P-PHONE1
Press [ set ]
Enter your pager access code up to 10 digits
if required
Example
PIN=1234567B
Note
■ If ycu have subscribed !□ a Caller ID service,
instead of tbe message you entered in
slep B, your pager will display Ihe caller's
telephone number, followed by "11" or “22"
11 When your unit receives a voice message
22 When your unit receives a fax document
■ If you have not entered a message in step B,
your pager will only display “11" or “22"
50