Recording your own transfer greeting message – Panasonic KX-FPG175 User Manual
Page 66
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Transferring recorded messages to another
telephone
----------------------
Option
________________________________________________________
This feature allows your unit to call a designated telephone number each time an incoming voice
message is recorded You can retrieve the transferred message during the same call using the
remote operation
To use this feature, program the transfer telephone number first (feature #60 on page 74) and
set the unit to TAD/FAX mode
1.
An incoming voice message is recorded in your unit
2 Your unit calls the transfer telephone number
3. Answer the call with the transfer telephone
4.
Your unit will play the transfer greeting message
Pre-recorded message
This IS a telephone answering system
Please enter your remote ID for remote operation
■ This message can be changed (see below)
5.
Enter the remote operation ID (feature #11 on page 69)
Б. Retrieve the message using the remote operation (p 5Э-61)
Recording your own transfer greeting message
The recording time is limited to 16 seconds
Suggested message:
This is a transferred message from (your name, business and/or
telephone number) Please enter your remote ID for remote operation ’’
1
3
4
Press
[MENU]
Display
SYSTEM SET UP
PRESS NAVI [■< ►]
Press
@ , then ® Q]
TRNS-GREETING
CHECK
[±]
Press
or CzD select "RECORD"
TRNS-GREETING
RECORD
[±]
Press
ISET)
TRNS REC
1 Ss
Speak clearly about 20 cm (5
inches) away from the microphone
■ The display will show the
remaining recording time
Example
TRNS REC
15s
When finished recording, press
[STOP]
■ The unit will repeat your message
Adjust the volume using (+]) or
Q
Press
[MENU]
To check the transfer greeting message
1.
Press
fMENUl. @[
b
][T]
2
Press f+~| or (5 to select “CHECK"
3
Press [ SET]
■ The unit will play the message
4. Press [MENU]
66
To erase your own transfer greeting
message
1
Press [MENU] ,
2
Press f+~) or f—~] to select “ERASE”
3
Press [ SET ]
■ Your own message will be erased
4
Press (MENLJ)
■ When transferring a call, the pre-recorded
transfer greeting message will be played