Video output connector (video out), Power cord socket, Rs485 terminals (rs485, a/b/gnd) – Panasonic WV-CPR650 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
® Video Output Connector (VIDEO OUT)
This connector is used to connect with the VIDEO
IN connector of the monitor.
® Power Cord Socket
This socket is used to connect the power cord
(supplied as a standard accessory).
© RS485 Terminals (RS485, A/B/GND)
These terminals are used for RS485 site communi
cation. Connect RS485 cables to these terminals.
© AC/DC Compatible Input Terminal
(DC12VIN/AC 24V IN)
This terminal is for connecting the 12 V DC or 24 V
AC power supply cord.
Cautions:
1. Connect to 12V DC (10.5V-16V) or 24V AC
(19.5V-28V) class 2 power supply only.
Make sure to connect the grounding lead
to the GND terminal when the power is
supplied from a 24V AC power source.
2. To prevent fire or electric shock hazard,
use a UL listed wire VW-1, style 1007 cable
for the Input Terminal.
-
6
-