Panasonic BB-HCM580 - Manual

Network Camera
PoE type
BB-HCM581
BB-HCM580
Indoor Use Only
Warehouses
Stores
School
Zero Distance Management is a new
business style made possible by
Panasonic network cameras.
It allows safe, smooth, economical
business management that is totally
free from conventional distance
and time limitations.
* This logo mark is
issued by the IPv6
Ready Logo Program
Committee, an IPv6
promotion group
established mainly by
the IPv6 Forum.
System Diagram
Monitoring Site Office Outdoors
Power over
Ethernet hub
Broadband
router
Modem BB-HCM581
Restaurant
See There
When You Can't Be There™
Access www.viewnetcam.com for registration information.
The PoE function supplies power through an Ethernet cable*. DDNS service and UPnP
compatibility make it easy for anybody to set up and use the system over the Internet.
*An optional AC adaptor can also be used.
View Places That You Couldn't
Even See Before
The BB-HCM581/HCM580 camera lets you monitor very large
areas with its maximum 360
o pan and 158 o tilt functions.
A full 42x power zoom also makes it possible to check
places in super-fine detail. Thanks to its PoE*
1 capability,
the camera can be installed in places where it is difficult
to provide power, like on factory and warehouse ceilings,
or near a building entranceway or elevator hall.
And dual-stack IPv4/IPv6 protocol prepares it
for IPv6 services. This lets you grab every business
possibility by breaking distance and time barriers
with Zero Distance Management*
2 .
*1-1 PoE (Power over Ethernet) supplies power through an Ethernet cable.
*1-2 Not supported by the BB-HCM580.
*2 For details, see the bottom of this page.