Panasonic WV-CPR650 - Manual (Page 30)

4. Gain Control Setting (AGC ON/OFF)
You can set the gain (brightness level portion of an
image) to automatic level adjustment (ON) or fixed
leveKOFF).
** CAM ; BET UP * * *
CAMERA TD OPP
ALC/ELC ALC 1
SHOTTKR —
AGC pii
SENS DP OFF
SYNC INT
WHITE BAL ATW 1
MOTION DET OFF 1
LENS DRIVE DC
Move the cursor to the AGC parameter and select
automatic level adjustment (ON) or fixed level (OFF).
5. Electronic Sensitivity Enhancement
(SENS UP)
There are two modes for SENS UP.
AUTO: If you select x32 AUTO, for example, the
sensitivity is raised automatically to x32 max.
When AUTO is selected, AGC is automatically
set to ON.
FIX: If you select x32 FIX, for example, the sensi­
tivity is raised to just x32.
** CAM 1 SET UP * *
CAMERA ID OFF “1
ALC/ELC ALC
SHUTTER —
AGC ON
SENS UP OFF.
SYNC INT
WHITE BAL ATW “1
MOTION DET OFF “1
LENS DRIVE DC
Move the cursor to the SENS UP parameter and select
the parameter for electronic sensitivity enhancement.
The preset values for SENS UP (electronic sensitivity
enhancement) change by pressing d or as fol­
lows:
— OFF — X2 АЛО Х4 AUTO Х6 AUTO — XIО AUTO
XI6 AUTO — X32 AUTO ^ OFF X2 FIX — X4 FIX —
□
C X6 FIX—X10 FIX— X16 FIX— X32 FIX
Notes:
• When ON is selected for SUPER-D in the ALC
CONT menu, FIX is not available for this item.
• When you select AUTO for SENS UP and ON for
SUPER-D, the SENS UP function has priority so
that the SUPER-D function is not activated auto­
matically.
• During the SENS UP function, noise or spot may
be appeared on the picture when the sensitivity of
camera is increased. This is normal phenomenon.
-28-