To reset to the factory settings, To close the special menu and return to the cam, To close the special menu and return to the – Panasonic WV-CPR650 User Manual

Page 41

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

To reset to the factory settings

1. Move the cursor to the CAMERA RESET parame

ter. The words PUSH SW start blinking,

2. While holding down ^ and . press E3 for 2

seconds or longer. The camera is reset to the fac
tory settings.

To close the SPECIAL menu and return to the CAM

SET UP menu
Move the cursor to RET and press O.

To close the SPECIAL menu and return to the

camera picture

Move the cursor to END and press [=1.

This manual is related to the following products: