Panasonic WV-CPR650 - Manual (Page 37)

2. Press El to start the white balance setup. The
words PUSH SW start blinking to indicate that the
white balance is being set.
/----------
•* CAM SET UP *•
CAMERA ID OFF 1
ALC/ELC ALC *1
SHUTTER —
AGC ON
SENS HP OFF
SYNC INT
WHITE BAL AWC-»Fti:^f SW
MOTION DET OFF 1
LENS DRIVE DC
RET
/
Blinking
Fine Adjustment for AWC (ATW) Manually
You can add the detailed setting for white balance set­
ting manually.
1. To set MASK SET, proceed as described in steps
1 to 4 of "ALC mode with SUPER-D OFF and ELC
mode’’ on page 26.
2. Move the cursor to R.
3. Press ^ or to obtain the optimum amount of
red gain.
4. Move the cursor to B.
5. Press ^ or to obtain the optimum amount of
blue gain.
3.
4.
When the white balance setting is completed, the
words PUSH SW stop blinking.
When you want to adjust the white balance manu­
ally, press to select AWC and press El ■ The
AWC menu appears on the monitor. (When ATW is
selected, pressing El displays the ATW menu.)
Note: When you need to set MASK SET, re-adjust to
obtain the optimum amount of red and blue gain.
-35-