Focus or flange-back – Panasonic WV-CPR650 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
, ■- . ■;.c. o
rr -
,
I
:
r,-,c r.-iL6i"c^« c
FOCUS OR FLANGE-BACK
The following adjustment should be made by qualified
service personnel or system installers.
3. Tighten the screws on the flange-back adjusting
ring.
1. Loosen the screws on the flange-back adjusting
ring.
Focus adust for
CS-mount lens
2. Turn the flange-back adjusting ring to the desired
position.
Caution: When the C-mount lens is mounted, do
not rotate the ring counterclockwise by force
after it stops. If the ring is rotated by force, the
inner lens or CCD image sensor may be dam
aged.
-13-
This manual is related to the following products: