To edit the camera id, Camera identification (camera id) setting – Panasonic WV-CPR650 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
You can use the camera identification (CAMERA ID) to
assign a name to the camera. The camera ID consists
of up to 16 alphanumeric characters. You can select
whether to have the camera ID displayed on the moni
tor screen or not.
1. Camera Identification (CAMERA ID)
Setting
Character Cursor
r
**
CAM SET UP **
CAMERA ID
ALC/ELC
AliC 1
SHUTTER
—
AGC
ON
SENS UP
OFF
SYNC
INT
WHITE BAL
ATW "1
MOTION OET
OFF 1
LENS DRIVE
DC
RET
V__________
>
To edit the CAMERA ID
1. Move the cursor to the CAMERA ID parameter.
2. Press El - The CAMERA ID menu appears. The
cursor on the letter “0" starts blinking.
Pointer-------- 1
^1.23456789
ABCDEFGHI JKIiM
NOPQRSTUVWXYZ
+-*/%$
SPACE
POSI RET END RESET
■Character
Area
- Command
■Editing
Area
CAMERA ID menu
3. Move the cursor to the character you wan: to
change by pressing d / [^ / £®i /
■
4.
After selecting the character, press El. The
selected character appears in the editing area.
(The pointer in the editing area moves to the right
automatically at this moment.)
5. Repeat the steps above until all characters are
edited.
To enter a blank space in the CAMERA ID
Move the cursor to SPACE and press El.
To edit a specific character in the CAMERA ID
1. Move the cursor to the editing area by pressing
Ce?
-23-