Panasonic KX-F160 - Manual (Page 41)

Setting the remote code (REMOTE ANS ID) for remote
operation
The REMOTE ANS ID is used to access your answering device from a remote location with a
touch tone phone (see pages 4-15 to 4-20).
Using this code, you can retrieve incoming messages recorded on the microcassette tape from a
remote location.
The REMOTE ANS ID is preset to 111. If you wish to change the number, you can choose any
number from 111 to 999 except numbers including “0”.
For proper operation, make sure that the REMOTE ANS ID number is different from your
PRIVACY RING ID number (see page 4-22).
HELPFUL HINT:
When you lose your procedures while programming, press the HELP button.
You will be able to print information about how to set.
3
C
j
IEDE
l
I)
j^CHI 4^ j^JKL sj Mwo sj
^PRS 7] s] 9]
EE r~E
Press the PROGRAM button.
The PROGRAM indicator lights.
Press #, then press 08.
The PROGRAM indicator flashes.
Enter the desired REMOTE ANS ID using the dial
keypad.
To correct an error while programming, press the
STOP/CLEAR button then repeat from step 2.
Press the SET button to store your selection into
memory.
The PROGRAM indicator lights.
Press the PROGRAM button to end the operation.
The PROGRAM indicator goes out.
NOTE:
We recommend that you do not use seven (7) as a code number, since this number is used as
the greeting message re-recording command for remote operations.
1-33