Panasonic KX-F160 - Manual (Page 35)

Individual transmission report setting
Each time a document is transmitted, this feature gives you a printed record of the transmission
(XMT REPORT).
The following choices are available;
ON: The report is printed, indicating whether the transmission is successful or not.
ERROR: The report is printed only when transmission fails (default).
OFF:
The report is not printed.
Sample of the transmission report:
Print time: Hour/Minute AM/PM
Print date: Month/DayA^ear —
Jan. 01 1993 li:30m
t«. OTHER FACSIMILE START TIME USAGE TIME MODE PAGES RESULT CODE
01 1234567
\
______
Jan. 1 11:29AM 01’0S TX 02
Dialed number or
other party’s name
Length of
communication;
Minutes/Seconds
OK C005
*■
■*
Number of pages
transmitted
successfully
♦
Error code
(for the service
center only)
Communication
number Communication
start time Transaction mode:
TX... Transmission Communication
result
Explanation of communication result
OK:
PRESSED THE STOP KEY:
DOCUMENT JAMMED:
NO DOCUMENT:
PRINTER OVERHEATED:
PAPER OUT:
THE COVER WAS OPENED:
COMMUNICATION ERROR:
PASSCODE FAILED:
NO RESPONSE:
PAPER JAMMED:
Successful communication
The fax communication was interrupted since
the STOP/CLEAR button was pressed.
A document jammed.
The document was not fed into the unit properly.
Printing head was overheated.
The unit is out of recording paper.
The back lid was opened.
Transmission or reception error.
Passcode communication failed.
Receiving unit is busy or out of recording paper.
The recording paper was jammed.
NOTE:
If the printed time and date on the report are not accurate, reprogram them by following the
instructions on pages 1-18 and 1-19.
1-27