Panasonic KX-F160 - Manual (Page 13)

O CALLS Indicator:
Page 2-10
0 PROGRAM Button and Indicator:
Page 1-26
SET Button:
Page 1-26
HELP Button;
Pages 1-26 and 1-34
0 PAPER OUT Indicator:
Page 1-13
ALARM Indicator:
Page 1-15
O POLLING Button and Indicator;
Page 4-2
o LIGHT ORIGINAL Button
and Indicator:
Page 2-3
o RESOLUTION Button
and Indicators:
Page 2-3
0 RECEIVE MODE Button
and Indicators:
Pages 1-23 and 2-7
0 IN USE indicator:
Page 2-10
0TONE Button:
Page 4-25
0 PAUSE Button:
Page 4-26
FLASH Button:
Page 4-25
The indicator flashes to show the number of incoming
messages recorded.
Used to start or end programming functions.
The indicator lights when this feature is on.
Used to store parameters during programming.
Used to print an easy guide of programming procedures.
The indicator lights when the recording paper roll is
empty.
The indicator lights when any trouble occurs.
Used for polling function. The indicator lights when this
feature is on.
Used to transmit or copy originals with faint writing. The
indicator lights when this feature is on.
Used to adjust scanning line density. The indicators tight
to show which setting you are using.
Used to select the desired receiving mode. The
indicators light to show the mode in which the unit is set.
The indicator lights or flashes when the answering
device is in use.
Used to change the dialing mode from pulse to tone
during a dialing operation.
Used to insert a pause into a phone number during
programming.
Used to access some features of your host PBX.
REDIAL Button:
Page 2-16
(D AUTO Button and Indicator:
Pages 3-4 to 3-8
0 MONITOR (VOICE STDBY)
Button and Indicator:
Pages 2-4, 2-15 and 4-24
Used to redial the last dialed number.
Used for speed dialing.
The indicator lights when this feature is on.
Used for on-hook dialing and voice contact features. The
indicator lights when these functions are on.
1-5