Panasonic KX-F160 - Manual (Page 37)

Selecting the number of rings to answer in the ANS/FAX
mode
When in the ANS/FAX mode, the unit will automatically answer on the first ring when receiving a
call.
If you wish to change the number of rings to answer a call, you can choose among the following:
0: Toll Saver {see page 1 -30).
1: The unit answers on the first ring (default).
2: The unit answers on the second ring.
3: The unit answers on the third ring.
4: The unit answers on the fourth ring.
*: The unit will not ring (RINGER OFF).
HELPFUL HINTS:
•When you lose your procedures while programming, press the HELP button.
You will be able to print information about how to set.
• If you wish to have the opportunity to pick up the handset before the call is answered by the unit,
set the number of rings to “3” or “4”.
• If you find there is difficulty in fax receiving from machines that have an automatic transmission
feature, set the number of rings to “1".
•To confirm from the remote phone whether a new incoming message has been recorded or not
(see pages 4-15 to 4-20), select the Toll Saver position. This will save you the toll charge for the
3
CZlEEilEi)
[pBS
7 ]
[ t W
S]
[wXY 9j
Press the PROGRAM button.
The PROGRAM indicator lights.
Press #, then press 05.
The PROGRAM indicator flashes.
Press the number of the selection you desire.
Setting selections are:
0: Toll Saver
1: one ring
2: two rings
3: three rings
4: four rings
*: Ringer Off
Press the SET button to store your selection into
memory.
The PROGRAM indicator lights.
1-29
( continued )