CANOGA PERKINS 9145 Network Interface Device - Manual (Page 78)

9145 Network Interface Device 3-58
Displaying the Static and Dynamic ARP Tables
The Static ARP Table lets you manually configure or change specific IP and MAC addresses.
The Dynamic ARP table displays learned IP and MAC addresses and allows deletion of specific
address from the Table. Address are displayed by the 9145 port (User for Extension) that the
Address is received.
To view, set, or remove a static ARP address, follow these steps:
1. From the Utilities Menu, type [ 7 ], "Static ARP Table," and press .
2. At the prompt, type [ 1 ] to add a port, or type [ 2 ] to delete a port. Enter the IP Address
(xxx.xxx.xxx.xxx), MAC Address (xx.xx.xx.xx.) and the Port (press to select User or
Ext).
3. To return to the Main Menu, press .
Canoga Perkins Corp. Ethernet Network Interface Device 04-Dec-2006
Model 9145-5 V96.05 F96 9145 DC_172.16.142.225 07:34:40
------------------------------------STATIC ARP TABLE----------------------------
IP Address MAC Address Port
---------- ----------- ----
Add or Delete an entry (1=Add, 2=Delete from table):
------------------------------------Messages------------------------------------