CANOGA PERKINS 9145 Network Interface Device - Manual (Page 45)

9145 Network Interface Device 3-25
Table 3 – T rap Configuration Options
Trap When enabled, sends a Trap if. . .
Local/User Port Link, Remote User
Port Link, or Extension Port Link The link went down and came back up
Remote Fault Received A port receives an RMTF
Link Loss Forwarding A port loses a received link and transmits
notification to the next port
Cold Start The 9145 is reset by a power failure or forced reset
Authentication An unauthorized host attempts SNMP access
Side Band Mgmt Channel SBMC is lost or back online
Diagnostics Loopback is enabled or disabled
Configuration When the 9145’s remote unit has an incompatible
firmware
Power Supply When the power supply is failing
SFP An SFP change occurs