CANOGA PERKINS 9145 Network Interface Device - Manual (Page 64)

9145 Network Interface Device 3-44
Managing Logged In Users
At times, you may need to monitor which users are currently logged in to the 9145 and, if
needed, force off specific sessions (requires supervisor access). The Manage Logged In Users
screen shows current users by session number. An asterisk (*) next to the session number
indicates your session. To access the Manage Logged In Users screen, follow these steps:
1. From the Main Menu, type [ 8 ], "Manage Logged In Users," and press .
2. To force a session off, type the number for that session and press .
Note: Although a user with any level of access can view this screen, you must have supervisor
access to force off a session.
3. To return to the Main Menu, press .
Managing the Network Interface
When configuring ports, it is best to configure options in this order:
1. Set up the physical layer, such as port speeds.
2. Set up the VLAN rules, translation, and priority bits.
3. When all aspects of the link are ready, connect cables and start the network services.
Canoga Perkins Corp. Ethernet Network Interface Device 04-Dec-2006
Model 9145-5 V96.05 F96 9145 DC_172.16.142.225 07:38:38
----------------------------MANAGE LOGGED IN USERS------------------------------
Session Type Username Access Description
--------------------------------------------------------------------------------
Console AT LOGIN MENU
* 1. Network admin Supervisor Default Account
* = Current Session
ESC to exit or the number of the session to force off:
------------------------------------Messages------------------------------------