CANOGA PERKINS 9145 Network Interface Device - Manual (Page 56)

9145 Network Interface Device 3-36
3. The Edit Host Access Menu sets the following parameters.
1. Telnet Access
Telnet and SSH, Telnet Only, SSH Only, or None
2. FTP Access
Select FTP and SFTP, FTP Only, SFTP Only, or None
3. SNMP Access
Select Write (also allows Read access), Read, or None
4. SNMP Protocol
Select V1/V2c/V3, V1/V2c, or V3
5. V1/V2c Read Community
Enter name of community, up to 11 characters
6. V1/V2c Write Community
Enter name of community, up to 11 characters
7. V1/V2c Access Level
Select Supervisor, Operator, or Observer
4. To remove a host, type [ d ], then follow the prompts.
5. To return to the Main Menu, press .