Get new file with tftp, and press
Page 48

9145 Network Interface Device

3-28

To upgrade 9145 software, follow these steps:

1. Access the SNMP Configuration Menu before starting the software upgrade: enter the

IP Address, Subnet Mask, and Default Gateway for the 9145.

2. From the Main Menu, type [

], "Software Upgrade," and press .

3. At the Software Upgrade Menu, type [

], Get New File with TFTP, and press .

Canoga Perkins Corp. Ethernet Network Interface Device 04-Dec-2006
Model 9145-5 V96.05 F96 9145 DC_172.16.142.225 07:38:04

------------------------------------SOFTWARE UPGRADE----------------------------

Time Since Last Restart 2 days 13:53:23

Local Remote Offline

Last Data
Active Firmware 96.05
Inactive Firmware 12.15

Bootcode 06.30

1) Software Reset Reset Reset

2) Swap Bank & Reset Swap Swap

3) Get New File with TFTP

Select [1-3]:

------------------------------------Messages------------------------------------

Canoga Perkins Corp. Ethernet Network Interface Device 29-Nov-2006
Model 9145-5 V05.00 F96 9145 D 10:20:16

-------------------------------MANAGEMENT IP CONFIGURATION----------------------
Local Remote L357

MAC Address 00 40 2A 00 87 3A
Management Port UP

1) Manager IP Address 172.016.142.225
Subnet Mask 255.255.000.000
Default Gateway 172.016.001.001

2) Test IP Address 000.000.000.000
Test Subnet Mask 255.255.255.000
3) Inband Management Port Both Ports

4) Management VLAN Tagging Disabled
5) Management VLAN Number 1
6) SLIP/PPP IP Address 000.000.000.000

7) Serial Port Config VT100
8) Telnet Security Disabled

Select [1-8]:
------------------------------------Messages------------------------------------

Page 48