Storix Software SBAdmin Linux System Recovery Guide - Manual (Page 60)

In any case, your next selection will take you the screen for adding, changing or removing meta-disk definitions
as follows:
From this screen you can choose to Create, Create and Restore, or Delete a meta-disk. The option to
Create/Restore is only available if this is a meta-disk whose raw data contents were included on the system
backup. The MD Name must begin with “md” and is followed by a number between 0 and 31.
Specify the RAID Level as described above, keeping in mind the minimum number of devices that must be
assigned to this meta-disk to accommodate the RAID level.
Information on the other options may be displayed by pressing the F1 (help) key. For a list of selections for a
particular field, press the F4 key.
The Device type may be one of DISK (for whole disks), PP (for partitions), LV (for logical volumes) or MD (to
build the meta-disk on other meta-disks). The RAID devices field may only be filled in with devices of the type.
Press F4 in the RAID devices field to list the devices available (of the type specified in the Device type field)
and select from the list as shown:
Storix System Backup Administrator 60 Version 8.2 Linux System Recovery Guide