Storix Software SBAdmin Linux System Recovery Guide User Manual
Page 22
a. SSH client program (i.e. “ssh sbadmin@192.168.1.121”): Note that you will always use the user id
“sbadmin” and the password you selected in the previous step. If you do not have an SSH client
program, you can use the one installed on the SBAdmin Administrator System. This program is called
strimsh (i.e. “/opt/storix/bin/strimsh sbadmin@192.168.1.121”).
or
Select
Utilities
!Start Remote Install Manager
from the SBAdmin Interface. A window will appear
where you must enter the remote install password:
Select the Remote Install Client Name from the drop-down list. The primary IP address of the client
will be shown in the Remote Install Client IP field. You may change this IP address if you are
connecting using a different adapter.
When you press the
Connect
button, a new terminal window will display, and the
will appear. You can, from this window, perform all system installation and maintenance tasks
for the remote client.
Storix System Backup Administrator
22
Version 8.2 Linux System Recovery Guide