Welch Allyn Image Capture System - User Manual - Manual (Page 21)

3
13
Review Draft Company Confidential Aug 24, 2004
Software Setup
The Welch Allyn Image Capture System offers two levels of security. The System
Administrator level allows the user to create passwords and select the proper equipment.
The Application User level allows the clinician to use the Welch Allyn Image Capture
System.
System Administrator
Welch Allyn recommends that the System Administrator for the Welch Allyn Image
Capture System change the login password after the first sign in.
1. Login to the Welch Allyn Image Capture System. The default password is “initial” and
is case sensitive. Your password brings you to the main Select Session / Create
Patient screen.
2. Click Settings > Admin. This brings you to the Admin Settings screen.
3. The Passwords tab allows the System Administrator to create a new password or
change an existing password that allows access to the Welch Allyn Image Capture
System. Please keep the following information in mind when setting up the
passwords:
a. A typed password is required in the Admin password space. Do not leave this
space blank.
b. A typed password is not required in the Application password space.
c. Make sure that the Application and the Admin passwords are different.
d. All passwords are case sensitive.
Note You can only access this screen if you have logged into the Welch Allyn Image
Capture System with the default admin password.