Welch Allyn Image Capture System - User Manual - Manual (Page 13)

2
5
Review Draft Company Confidential Aug 24, 2004
Equipment Setup
Setting up the Computer
If you choose to have a third party setup the computer and install the Image Capture
System software, verify that the system works properly, sign and date the warranty card,
and return the card to Welch Allyn.
Installing the Notebook PCMCIA Card
The PCMCIA card (REF 88802) is for a notebook computer. This section is required only if
the computer does not have an integrated IEEE 1394 port.
1. With your notebook computer on, insert the FireConnect for Notebooks adapter in
the PCMCIA slot.
Figure 1. Notebook adapter and slot
2. Windows
®
automatically detects the FireConnect for Notebooks adapter and installs
the drivers. Your installation is complete.
Installing the Desktop PCI Card
The PCI card (REF 88801) is for a desktop computer. This section is required only if the
computer does not have an integrated IEEE 1394 port.
1. Turn the power off to the computer and disconnect the power cord. Open the
computer cabinet, following the manufacturer’s instructions.
2. Locate an unused 32-bit or 64-bit PCI expansion slot and remove the expansion slot
cover. Save the slot cover screw for use in Step 6.
PCMCIA slot
FireConnect™ for
Notebooks
adapter