Welch Allyn CP 200 Spirometry Option - User Manual - Manual (Page 7)

Directions for Use Chapter 1 Introduction 3
Product Overview
The CP 200 spirometry option performs FVC and SVC testing, including pre- and post-
bronchodilator testing. It displays flow/volume and volume/time curves in real time,
depicting both inspiratory and expiratory measurements.
For details, see the following sections:
• “Features” on page 5
• “Ordering Information for Replacement Parts” on page 9
• “Specifications” on page 53
Figure 1. Components of the CP 200 Spirometry Option
Disposable flow transducer
For single patient use. Eliminates the need for disinfecting
procedures, which can be difficult and expensive.
Minimizes the risk of cross-contamination.
Pressure tubing
Connects the flow transducer to the sensor.
Sensor
Connects to the CP 200 electrocardiograph.
Converts pressure to air flow.
Nose clip
Recommended during testing to avoid leaks.
Three-liter calibration syringe
For daily use to calibrate the spirometer for accuracy.