Welch Allyn CP 200 Spirometry Option - User Manual - Manual (Page 16)

12 Chapter 2 Reviewing the Spirometry Settings Welch Allyn CP 200 Spirometry Option
“Spirometry Settings” Menu Tree
Spirometry
Settings
Operation
Settings
Calibration
Settings
Screen
Settings
Print
Settings
Patient Data
Settings
Edit
Interpretation
List
Select Protocol
Select Adult Predictive Norm
Select Ped. Predictive Norm
Select Best Effort Formula
Select FVC Reversibility Formula
Select FEV1% Formula
Enable Predictive Points
Enable Predictive Curve
Enable ATS Interp. Results
Enable Composite Norm Values Calibrate Spirometer
Enable Auto Calibration Report
Print Calibration Report Select Default FVC Curve
Select FVC Display Parameters
Select Efforts
Select FVC Curves
Select FVC Print Parameters
Select Scale
Print Lung Age
Print “Unconfirmed Report”
Print “Reviewed By”
Print “Patient Cooperation”
Print Quality Grades
Print Patient Education
Print Physician’s Comments
Auto Print First Name
Second Last Name
Middle Initial
Age/Birth Date
Weight
Smoke Years
Packs/Day
Medication
History
Comments
Note:
As part of spirometry setup, you can also go to the System Settings > Device Configuration menu
and select the following spirometry-related units of measure.
• Flow: L/sec or L/min (units for the y-axis on flow/volume curves)
• Pressure: mmHg, mbar, inHg, kPa (units for the calibration menu’s atmospheric pressure values)
• Temperature: Fahrenheit or Celsius (units for the calibration menu’s temperature values)
For details, see the electrocardiograph manual.