Welch Allyn CP 200 Spirometry Option - User Manual User Manual
Page 44
40
Chapter 4 Performing Spirometry Tests
Welch Allyn CP 200 Spirometry Option
5.
Enter patient data, or recall saved patient data.
a.
To recall saved patient data
Press Search or Schedule, and select the patient. (For details, see CP 200
electrocardiograph manual.) Then press the desired softkey, as described here.
b. To enter patient data
Fill in the fields. All mandatory fields must be filled in before you can proceed.
When finished entering data, press the desired softkey:
•
Clear — deletes the patient data and returns to the Patient ID field.
•
Done — accepts the patient data and goes to the initial spirometry screen.
Softkey
Function
Your Next Action
New Test
Returns to the “Enter New Patient” screen. Most of the
patient’s data is automatically filled in. Some data fields
— medications, blood pressure, comments, history, height,
weight — will be blank because this information varies
over time.
Go to
Step b
, below.
Continue Test
Lets you continue a test-in-progress. This softkey appears
only if it is the same day and the calibration is the same.
Go to
Step 6
on page 41.
Review Test
Lets you recall any of that patient’s saved tests and review
its data. You cannot add new efforts, but you can edit the
interpretation, send the test to a memory card or
workstation, or print the test.
Go to
Important Fields
Description
Patient ID,
Last Name
Always mandatory. The patient must be identified.
Age/Birth Date, Height,
Gender, Race
Always mandatory. This information determines the automatic interpretation.
Weight
Mandatory only when using Schoenberg or Hedenström norm.
Smoke Years
Not mandatory. If the patient smokes, enter the number of years the patient
has smoked. If this value is 1 or more for an adult patient, and if patient
education is enabled, the smoking help sheet prints after the spirometry test
report. See