Torbal AD50 Series Manual - Manual (Page 8)

Instruction Manual - TORBAL AD Series
CHAPTER 5.
UNPACKING THE SCALE AND GETTING STARTED
1. Carefully remove the scale, pan, and all of its components
from packaging. Place them on a stable base where the
scale will not be affected by any mechanical vibrations or
air movements.
2. After removing the pan base and the pan from their packaging, carefully install the pan base onto the
scale by seating it on the pan support located in the middle of the scale. Once the pan base has been
installed, carefully place the pan on the base as shown below.
8