Torbal AD50 Series Manual - Manual (Page 29)

Instruction Manual - TORBAL AD Series
4. After enabling the totalizing function, DONE will be displayed, indicating that the function has
been configured and it is ready to use. To use the function follow the directions in Chapter 8.
To exit the mode menu, use the “C” key.
7.1.4.Automatic Zero Setting Mechanism (AZSM)
All AD scales are equipped with AZSM, the “Auto Zero Setting Mechanism.” AZSM
automatically maintains a “center of zero” condition within +/- 6d (i.e. 6 mg on scales with 0.001
readability). To enable or disable AZSM follow the steps below.
1. Enter the Main Menu by pressing the “M” key.
29
Table 7.1.3.F: Totalizing Operating Modes
Automatic Totalizing and Adding: Automatic
When set to Automatic, the scale will automatically
add the first stable weight reading to the total.
Manual Totalizing and Adding: Manual
When set to Manual each weigh has to be manually
added to the total by pressing a designated key.