Torbal AD50 Series Manual User Manual
Page 47
Instruction Manual - TORBAL AD Series
Automatic:
When set to Automatic, the result will be automatically cleared after the animal is removed. The scale
will perform an automatic tare and prepare for the next weighing. If the weighing container is changed
the scale must be tared manually by pressing the “T” key.
Semi-Automatic and Manual:
When set to Semi-Automatic or Manual, the weighing result will remain displayed and it must be
manually cleared after the animal has been removed,. To clear the weighing result, press the “C” key.
After the result has been cleared, the scale must be tared. To tare the scale, press the “T” key.
To clear
To tare
To exit animal weighing and switch to a different function, press “C” to clear the current function and
then press “F” to select a different function (follow Steps 1 through 3 from Chapter 8 on page 44).
47