Torbal AD50 Series Manual - Manual (Page 50)

Instruction Manual - TORBAL AD Series
5. The weight of the sample will be displayed as it is placed on the pan.
Note: Minimum individual piece weight must be equal to or greater than 3e. Attempting to set an
average individual piece weight which is lower than 3e will result in s Sample Low Error (SAPL
LO). To see this limit expressed in grams turn to detailed specifications on page 4.
6. Once the weight of the sample stabilizes and the stability indicator appears on the display, press
“T” to confirm and accept the sample weight.
7. The display will now indicate to begin filling. The word FILL will flash on the display for
approximately 5 seconds. At any time during the FILL command, add the remaining pieces.
50