Torbal AGC Series Parts Counting - Manual

AGC Series: Quick Reference Guide http://www.torbalscales.com/laboratory-balances.html
Totalizing
Before using this reference guide, enable and configure Totalizing by following the steps listed in Chapter 7.1.3 of the
Instruction Manual. To enter the Totalizing mode press the “Function” key, and select the function by pressing the “T”
key while “Totalize” is displayed.
1. Place a container on the pan and tare it by pressing the “T’ key.
2. Place the first object in the container located on the pan.
Automatic Manual
The weight of the object will be added automatically.
Once the weight stabilizes, the
TOTAL indicator will
appear on the display, signaling that the weight has
been added to the grand total
Once the weight stabilizes and the stability indicator
appears on the display press the “Function” key to add
the weight to the grand total.
Add to Total
With each added weight, the grand total result appears on the display for approximately three seconds. To recall
the grand total at any time, press the “Menu” key.
1