Torbal AD50 Series Manual - Manual (Page 60)

Instruction Manual - TORBAL AD Series
Note: To change the percent sample press “C” and repeat Steps 1 to 5. If the same sample weight
is used, the scale can be tared without clearing the function and new objects can be weighed.
To exit percent weighing and switch to a different function, press “C” to clear the current
function and then press “F” to select a different function (follow Steps 1 through 3 from Chapter
8 on page 44).
(F) Totalizing
Totalizing is used to add and total weighing results. To use this function, follow the steps below.
1. Place a container on the pan and press “T” to tare.
60