Torbal AGC Series Totalizing - Manual

AGC Series: Quick Reference Guide Torbal Precision Scales
Percent Weighing %
Before using this reference guide, enable and configure Percent Weighing by following the steps listed in Chapter 7.1.3
of the Instruction Manual. To enter the Percent Weighing mode press the “Function” key, and select the function by
pressing the “T” key while “Percent” is displayed.
1. Place a container on the pan and tare it by pressing the “T” key.
2. The scale will display the weight of a previously stored sample. To accept the current sample setting, press the
“T” (YES) key and skip to step 5. To assign a new sample, press the 0(NO) key.
3. Place the sample on the pan.
1